Energizer Solar Peak 3000 Manual Del Usuario página 11

ENERGIZER SOLAR PEAK 3000
AC Charging
Quick charging technology is designed for AC charging. You can control the charging power via the AC charging speed
switch. The slow charge mode is on by default when power station is turned on, and can be switched to quick charge
mode by the button. Quick and slow charging mode switching can also be set by the Energizer Solar Portable Power App. If
the current is continuously higher than 20A, the charging input port will start the self-protection function, and the charging
overload protection switch will automatically trip. Press the charge overload protection switch to restore charging after
confirming no fault.
Quick charge and slow charge can be switched by the button.
The charging power range can be adjusted by the Energizer Solar Portable Power App.
Please use the standard AC charging cable for fast charging. The AC charging cable should directly plug into a 10A (or
above) wall-mounted socket. Energizer Solar is not liable for any damages resulting from the use of unofficial AC charging
cables or failure to follow instructions.
Note: When AC charging through the power station (US model), please use the official standard AC charging cable
for charging, the AC charging cable plug needs to be directly connected to the wall plug that supports more than
15A current. Energizer Solar is not liable for any damages resulting from the use of unofficial AC charging cables or
failure to follow instructions.
AC wire
Quick charge enabled
11
ENGLISH
Fully charged in less than
2 hours