Energizer Solar Peak 3000 Manual Del Usuario página 18

ENERGIZER SOLAR PEAK 3000
Icon
If there is a warning occurs during the use of this product, and the warning icon still does not disappear after restarting
the device, please stop using it immediately (do not try to charge or discharge). If none of the above information can solve
problem you encounter, please contact Energizer Solar at www.energizersolar.com
Fault Description
Fan stop
Discharge soft start fault
Charge soft start fault
MOSFET UTP fault
Anderson hardware OCP fault
Anderson software OCP fault
PV hardware OCP fault
PV1 software OCP fault
PV2 software OCP fault
Car charge output OCP fault
PV output OVP
(over voltage protection) fault
PV1 input OVP fault
PV2 input OVP fault
Anderson OTP fault
PV1 OTP fault
PV2 OTP fault
Car charge output OTP fault
Abnormal communication
Abnormal USB
Abnormal type C
Turn on and off, contact after sales if still not fixed.
Auto recover after fault is cleared.
Auto recover after fault is cleared
Turn on and off, contact after sales if still not fixed.
Remove PV charge, auto recover after connecting PV and turn on.
Turn off output, manual recover after fault is cleared.
Remove PV charge, auto recover after connecting PV and turn on.
Stop PV1 charging, auto recover after connecting PV and turn on.
Stop PV2 charging, auto recover after connecting PV and turn on.
Turn off output, manual recover after fault is cleared.
Stop PV. Auto recover after fault is cleared.
Stop PV1. Auto recover after fault is cleared.
Stop PV2. Auto recover after fault is cleared.
Turn off output, manual recover after fault is cleared.
Stop PV1. Auto recover after fault is cleared.
Stop PV2. Auto recover after fault is cleared.
Turn off output, manual recover after fault is cleared.
Turn on and off, or change operation environment.
Contact after sales if still not fixed.
Auto recover after removing abnormal USB.
Auto recover after removing abnormal type C.
18
Solution
ENGLISH