Descargar Imprimir esta página

Energizer Solar Peak 1800 Manual Del Usuario página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

ENERGIZER SOLAR PEAK 1800
In normal mode, long press the LED light button to exit the automatic shutdown setting, and the battery icon
the screen will flash. Long press again to enter the automatic shutdown setting, and the battery icon
flash. The automatic shutdown setting is to protect the battery from low power, exiting this setting may damage the
battery life, please use it with caution.
Note: With no AC input active, long press the above AC output button, you can switch the AC off-grid output frequency
(
/
), long press 2s to switch, the AC output icon will flash 3 times after successful switching.
AC output power switch
AC output
After ensuring that the main power is turned on, short press the AC output power switch to turn on the AC output.
Short press the AC output power switch again to turn it off.
The default standby time of the AC output port is 1 hour. After 1 hour without any load on the AC output port of this
product, the AC output power will be automatically turned off. In normal mode, long press the LED light button, the
AC output power switch can exit the automatic shutdown setting, and the battery icon
Long press again, the AC output power switch enters the automatic shutdown setting, and the battery
icon
does not flash.
Long press the LED light button to exit the AC automatic shutdown setting: it is applicable to AC equipment below
10W and pulse working equipment.
When the AC output is not in use, turn it off to save power consumption.
Short press
USB output
9
ENGLISH
on
will not
on the screen will flash.

Publicidad

loading