Publicidad
Idiomas disponibles
Idiomas disponibles
2
Align
to the wall and make
WM1
four marks.
× 4
Note
Use a level to check whether
3
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV.
Note
Pilot holes must be drilled to a depth of 75 mm
(3 inch), using a 10 mm (13/32 inch) diameter drill
bit.
4
4
WM1
WM1
is level.
× 4
ø 10 mm
(13/32 inch)
75 mm
(3 inch)
WA1
− 14 (EN) −
5
Install
on the wall.
WM1
Note
Use a level to check whether
Precaution
Do not over-tighten the lag bolts
Improper tightening could reduce the holding
power of the lag bolts
6
Pull out the arm of the bracket to
the end.
Preparing for the Installation
of the TV
Note
Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.
WM1
WW1
WS2
WM1
is level.
WS2
.
WS2
.
Publicidad
