Publicidad
Idiomas disponibles
Idiomas disponibles
Caution:
e To ensure safety, never attempt to preset stations while you are driving.
Preset Station Setting
e Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset Memory.
,
Auto Preset Memory (APM).
~ ,
Manually save a station in the preset memory.
Automatically save stations with good reception in
the preset memory.
@ Select a band and frequency. (previous page)
@ Select a band. (previous page) .
@ Press and hold
or
for more
@ Press and hold [APM] for more than 2 sec-
than 2 seconds until the preset number blinks.
onds.
6) Press
or ES [LV] or [A] to select a
preset number (1—6).
e The 6 stations with good reception will be auto-
O
Press and hold
(preset) for more than
matically saved in the memory under preset num-
ber 1 to 6.
eOnce
set, the preset stations are sequentially
scanned for 5 seconds each. (scanning)
2 seconds to memorize.
e The display blinks once, and a receiving sta-
tion is saved in the memory.
Preset number
Note:
e Frequency setting can be performed even after se-
[BAND]
lecting a preset number,
(auto preset memory)
e To suspend preset write, press [D/SPLAY]/IDISP]
(SOURCE)
(band selection)
(display).
[<] [>]
[DISP]
l
(display)
(tuning)
O) Select a band and frequency. (previous
[1] to [6]:
[VITA]
page)
(preset station)
(preset station)
© Press and hold [1] to [6] for more than
e
2 seconds to memorize.
Panasonic
Note:
e Existing saved stations are overwritten with new stations after this procedure above.
Preset Station Calling
|
@ Select a band. (previous page)
@ Press the Spectrum Analyzer display [TUNE | to
show |P.SET! (preset).
© Press SA 0 F/V]
or [A].
(Press [1] to [61 on the remote control unit.)
|
35
CQ-HX1083/HR1003U
Publicidad
