Alcad DMH-542 Manual De Instalación página 16

3. OSD MENU INSTRUCTION
The HD Modulator will initialize to the main
interface after power on, and press
the main menu.
• Quick Install
• DVB Settings
• TS Settings
• System Setup
• About
3.1 QUICK INSTALL
• Country: press ◄► key to enter country list,
and use ▲▼ key to select a country, then
press OK
• Channel Name: press ◄► key to change the
channel number.
• Frequency: frequency setting in range of
50~860MHz, press ◄► key to move cursor and press ▲▼ key to
change numbers.
• Bandwidth: 6M/7M/8M optional, press
◄► key to switch bandwidth only in
DVB-T mode.
• RF Attenuation: RF attenuation setting,
press ◄► key to change value in range of
0~30dB, step 1 dB.
• Signal Source: press ◄► key to select HD or CVBS.
• LCN: use ▲▼◄► key to edit logical channel number.
16
to confirm.
OK into