Publicidad
Idiomas disponibles
Idiomas disponibles
er installed with this software through a USB or network.
Ant then you can also open, edit and save your files on the
another computer.
How to Clear or Remove Items from Software Window
1. To clear ALL menu items within the display, click Clean
Auto. A pop-up box will be displayed. "Are you sure to re-
move all auto recipes?" Click Yes. And the specific item is
not allowed to delete.
2. Your menu display is now clear.
How to Retrieve Your Saved File
1. To retrieve your saved menu items, click on File and Open.
2. Select your previously saved menu file. Your menu item will
be re-imported and displayed in the window.
How to Export Your Menu Items via USB Export all
1. To export menu items to USB, click the Export All.
2. Select your location to export. Your folder will be automat-
ically named "COOKDATA". If the current directory already
has a "COOKDATA" folder, the original "COOKDATA" folder
will be deleted and a new folder will replace the original
folder.
3. Copy the COOKDATA folder to the root directory of the USB.
How to Export Your Program File Cookdata to USB
1. Your saved file is now ready to be transferred to USB.
Note: The USB must be formatted to FAT32 to successfully
transfer the file and upload to the microwave unit.
2. To load your menu items to the microwave, insert the USB
stick into the USB port located on the right hand side of the
unit, as directed in (Fig.3 on page 3). Press the USB button
to start the transfer. The transfer will take a few seconds.
"SUCCESS" will be displayed in the window when the trans-
fer is completed.
3. The USB is now ready to use.
Remarks for using USB card:
1. Small parts, choking hazard.
2. Please wait few seconds or more between plugging in and
unplugging the USB card.
3. Do not unplug the USB card while in use or processing.
4. Other USB stick may not compatible with & may destroy the
appliance.
Return to factory settings
To return the microwave back to the factory settings press and
hold the 'play' and '0' button until the buzzer sounds, the display
will show 'CHECK'. When the microwave restored the factory
settings the display will show '11'. If returning to the factory
settings failed the display will show '00', press 'play' button and
the display will now show 'CLEAR' and the buzzer will sound
once, after a check the display will either show '11' or '00'.
User options
This microwave allows the user to change some options. To
change first start by opening the door and press '2' for 5 sec-
onds, the display will show 'OP:--'. Press the number button
related with what needs to be changed, for example '2'. Now
the display shows 'OP:23', keep pressing '2' until the desired
setting is displayd 'OP:20'/'OP:21'/'OP:22'/'OP:23' (it cycles
trough these options). To set the desired setting press 'Start'
button. Now the change is saved. During changing the options
you can cancel this by pressing 'Pause' button. The change
won't be saved and the microwave will return to 'door open
mode'. Bellow an list of the options that can be changes, bold
printed items are the preset options.
Option
Setting
OP:10
1 EOC Tone
OP:11
OP:12
OP:20
OP:21
2 Beeper
Volume
OP:22
OP:23
OP:30
3 Beeper
On/Off
OP:31
OP:40
OP:41
4 Keyboard
Window
OP:42
OP:43
OP:50
5 On the Fly
OP:51
OP:60
6 Door
Reset
OP:61
OP:70
7 Max time
OP:71
8 Manual
OP:80
Program-
OP:81
ming
OP:00
OP:01
0 Clean
filter
OP:02
OP:03
Utensils
There may be certain non-metallic utensils that are not safe
to use for this microwave. If in doubt, you can test the utensil
following the below procedure.
Test of utensil:
Put a microwave safe container with 1 cup of cold water (about
250ml) together with the utensil inside the microwave. Cook on
maximum power for 1 minute. Feel the utensil carefully. If the
utensil becomes warm, DO NOT use it with the microwave. Do
not cook the utensil over 1 minute.
Description
3 seconds beep
Continuous beep
5 quick beeps, repeating
Beeper Off
Low
Medium
High
Key beep Off
Key beep On
15 seconds
30 seconds
60 seconds
120 seconds
On-the-Fly Disable
On-the-Fly Enable
Door reset Disable
Door Reset Enable
60 Minute Maximum Cook Time
10 Minute Maximum Cook Time
Manual Programming Disable
Manual Programming Enable
Off-Never Display Clean filter
Weekly-Display every 7 days
Monthly-Display every 30 days
Quarterly-Display every 90 days
11
GB
Publicidad
