Publicidad
Step 21
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D16 and D17).
å
Fasten a RIGHT DRAWER SLIDE (AA) to the RIGHT DRAWER SIDE (D16) and a LEFT
å
DRAWER SLIDE (BB) to the LEFT DRAWER SIDE (D17). Use four GOLD 5/16" FLAT HEAD
SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
NOTE: The DRAWER SLIDES are marked "DRAWER RIGHT" and "DRAWER LEFT" for
å
easy identifi cation.
Fasten a PULL (103K) to the DRAWER FRONT (S). Use two SILVER 5/8"
å
MACHINE SCREWS (15S).
Repeat this step for the other drawer.
å
BB
2
3
103K
SILVER 5/8" MACHINE SCREW
(4 used for the PULLS)
Page 24
Roller end
1
D17
15S
GOLD 5/16" FLAT HEAD SCREW
10A
S
(4 screws per drawer)
3S
(8 used in this step)
416971
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Roller end
D16
1
AA
2
3
www.sauder.com/services
Publicidad
