Step 22
Carefully stand your unit upright.
å
To insert a drawer into your unit, place the rollers on the
å
drawer behind the rollers in the unit and push the drawer in.
NOTE: Be sure the drawer is level as you insert it in your unit.
å
Center a SCREW COVER (18P) over the head of each
å
SCREW and press fi rmly.
Push a CAM COVER (13P) onto each visible HIDDEN CAM.
å
Apply the WARNING LABEL (2L) to the TOP (E). You should
å
be able to read the label when the TV is removed from the
unit. When the TV is in place, it should hide the label. Peel
off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life
å
of the product. Once applied, do not try to remove it.
www.sauder.com/services
2L
E
70 lbs.
30 lbs.
40 lbs.
15 lbs.
R
15 lbs.
S
416971
Pro Tip: Lift with your
legs. And, you know,
your arms.
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 70 lbs.
- The base of the TV must be able to sit
completely on this shelf.
To cover HIDDEN CAMS
18P
(8 used)
To cover screws
13P
(6 used)
Page 25