Publicidad
Idiomas disponibles
Idiomas disponibles
Dispenser
Features
Hidden
Electronic
Control
Features
,°boo,.oo°°
This mode is intended to deactivate power to the LED and dispenser lights, while allowing the
"Jr"
controls to remain operational. No visual or audio alarms will be available while in this mode.
To activate
and deactivate
Sabbath Mode:
NOTE: In the event that power
To activate, press and hold both the _,_
and _,,OF,buttons simultaneously
for 3
isinterP_Jptedwhitethe Sabbath
seconds. After 3 seconds, the LED and_dispenser_lights will turn off. Dispenser
light
Mode is active, the control wiII
remain in Sabbath Mode when
will not activate during dispensing
while in this mode.
power returns.
To deactivate, press and hold both _
and _
buttons simultaneously
for 3
q
q
seconds. After 3 seconds
the LED and dispenser lights will activate.
Auto
Display
The auto display controls the illumination of the LED display based on the light readings received from the SENSOR. If
the SENSOR indicates low light levels, the display will be dimmer than if displaying during well-lit periods.
To set the power level of the display:
Press and hold both the _,_o,_ button and the freezer y
button for 3 seconds. The current active state will show in the
q
display by using ALO
for on. AL A for auto.
A
NOTE:The Ietters AL witl always show in freezer
Use the refrigerator ........ button to scroll through the display states,
temperaturedisplaywhiteinthis
mode.
Activate the chosen setting by pressing the @
button.
Conversion
Mode
o
F |
Temperature
lI
This mode is available to change the temperature
display between Fahrenheit and Celsius.
|
To change currenttemperature
reading:
o C
|
•
Press the @
and _
buttons simultaneously
for 3 seconds.
Hidden
Lockout
for Upper
Keypad
The purpose of this mode is to prevent tampering with the upper set of dispenser controls.
_
This includes the Display On/Off,
Max Freeze, Max Cool, Vacation Mode, and Temperature Set
_
Jr"
fu nctions.
To activate and deactivate
Hidden Dispenser
Lockout:
To activate, press the @
and @
buttons simultaneously
for 3 seconds.
To deactivate, press the @
and @
buttons simultaneously
for 3 seconds.
ON/OFF
Function
[I
W&RNIN
Tile ON/OFF function turns off cooling to the fresh food and |[
=K.am
.....
freezer sections while allowing the lights and electronic
|To avoid electrical shock which can cause severe personal
display to stay on. The dispenser functions will not be
|injury or death, do not perform maintenance or service on
available while in this mode.
[refrigerator
unless unit is unplugged.
To deactivate
and activate unit:
To deactivate, press the freezer X button until the readout registers
beyond the maximum allowable freezer temperature.
At this point, the
LED will read 0FF. Press the _
button to confirm the selection,
To reactivate, press the freezer y button. Press the _
button to
confirm the selection.
NOTE: After reactivation,
the display will
show temperature
setting previously
in
use. See the section Now to Adjust
the
Temperature
Controls
for instructions
on how to set food compartment
temperatures.
18
Publicidad
