Fax +32 2 359 95 50
CLEANING AND MAINTENANCE
Before attempting any cleaning operation, make sure the
•
appliance is unplugged from the supply socket and fully cooled
down.
To clean the exterior surfaces, simply wipe over with a soft damp
•
cloth and dry thoroughly.
Never use abrasive products
•
On no account must the jug kettle or its power base be immersed
•
in water.
FILTER
Your appliance is provided with a spout filter. When you want to
•
boil water, settle the filter first. The filter needs to be in place for
the kettle to work. Removing the filter will cause dysfunction in the
auto-shut off mechanism.
When the lid is open, you can remove the particle filter by taking
•
it out of the spout and clean it under running water. When putting
it back, make sure the arrow on the filter is upwards.
Filter should be rinsed clean regularly.
•
DESCALING
To remove scale from the jug kettle, use products made especially
available for this purpose. Make sure to use a type recommended
for plastic kettles or coffee makers.
Copies of the I/B. Please reproduce them without any
changes
except
under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
6
Assembly page 6/24
special
instruction
from
Team
Print only
USK JK 20744 JK 32762 - 110127