Keysight U1701B Guia De Inicio Rapido página 6

How to Enter Setup Mode
Press and hold
instrument from OFF status.
Release
instrument will then enter setup mode. These
parameters will be remained in the non-volatile
memory even after the instrument is turned off.
To configure the related parameters on setup
mode, ensure that the following procedures are
followed:
1 Press
2 Press
3 Press
4 Press and hold
5 Press
6
when you hear a beep, the
(Left) or
menu item to be set.
(Up) or
parameter.
to select the digit to be adjusted,
the selected digit will flash.
save your setting.
for more than 1 s to exit setup
mode.
and power on the
(Right) to select the
(Down) to change the
for more than 1 s to
Keysight U1701B Quick Start Guide