Names And Functions Of Parts - Pioneer S-DJ08 Manual De Instrucciones

Names and Functions of Parts

Front Panel Facilities
3 2
INPUT
1
1
2
EQ 3
POWER 4
1 INPUT 1-4 indicators
Indicator lights for selected INPUT. During MUTE, the
selected INPUT indicator flashes.
2 EQ indicator
Lights when equalizer function is ON.
3 POWER indicator/clipping indicator
Standby : Lights red.
Power ON : Lights blue.
Power OFF : Indicator light is OFF.
During clipping : flashes or lights steadily pink.
If the amplifier generates signal clipping, this indicator
flashes (or lights steadily) pink. In normal use, the speakers
should be used so that the indicator does not flash or light
steadily pink. In the event this indicator flashes (or lights
steadily) pink, either lower the sound volume (LEVEL dial) on
the unit's rear panel, or else lower the level of the signal input
to this unit from the connected source component. Allowing
excessive signal clipping may damage this unit.
CAUTION
This product has been designed so that all indicator lights will
turn off when the user switches the appropriate controls on the
speaker body, or switches on the controller (when a controller
is provided as accessory). This condition makes it appear the
same as though the speaker has been disconnected (unplugged)
from its power source, but even at such times, electrical power
is still being supplied to the unit. In order to completely turn
off all electrical power to the unit, it is necessary to physically
disconnect the unit's power plug from its power outlet. As a
fire-prevention measure, the product should be installed within
easy reach of its power outlet so that the power plug can be
disconnected whenever you go on a trip or are otherwise not
using the unit for an extended period of time.
7
En