Settings For Each Type Of Battery; Settings - Cristec CPS2 Serie Manual Del Usuario

3.2.3 Settings for each type of battery

Type of
battery
SW5 SW4
TYPE-1 BAT.
Calcium Lead
OFF
Tin (e.g.:
Delphi/Delco
Freedom)
TYPE-2 BAT.
OFF
Lead Sealed
TYPE-3 BAT.
OFF
Gelled Lead or
Calcium Lead
TYPE-4 BAT.
Open Lead
with
ON
maintenance
(free
electrolyte)
WINTERING
for TYPE-1
OFF
BAT.
TYPE-2 BAT.
TYPE-3 BAT.
WINTERING
ON
For TYPE-4
BAT.
(*)Voltage on BAT 1/BAT 2 with 10% of rated current and a tolerance of +/- 1%
Voltage on BAT D = BAT 1 or BAT 2 – approx. 0.4V

3.2.4 Settings

The charger's factory settings are:
TYPE-2 BAT. Sealed Lead (see table above)
BOOST in ON position
The installer should set the switches (excluding input and off-load output voltage) and possibly adjust the
output voltage using potentiometer RV1 (use the appropriate tool to turn the screw of the potentiometer),
depending on:
- the type of battery (contact the battery manufacturer if necessary)
- intended usage
www.Busse-Yachtshop.de
Switch positions
SW1
SW3 SW2
Boost
OFF OFF ON ON
OFF ON OFF ON
OFF OFF
ON ON
OFF OFF OFF ON
ON OFF OFF ON
OFF OFF OFF
ON
CPS2DEA.DOC
CPS2 12V
Voltage Voltage
Phase Phase
* *
Boost Floating
15.1V 14.4V
14.3V 13.6V
14.1V 13.4V
13.7V 13V
14.1V 13.4V
13.7V 13V
email: info@busse-yachtshop.de
CPS2 24V
Voltage Voltage Voltage
Phase Phase Phase
* *
Boost Floating Boost
30.2V 28.8V 60.5V
28.6V 27.2V 57.1V
28.1V 26.8V 56.3V
27.3V 26V 54.6V
28.1V 26.8V 56.3V
27.3V 26V 54.6V
28
CPS2 48V
Voltage
Phase
* *
Floating
57.6V
54.4V
53.6V
52V
53.6V
52V