Publicidad
Idiomas disponibles
Idiomas disponibles
Alarm indicator
3
Temperature indicators
4
4.2 Switching on and off
To switch on the appliance, insert the plug
into the wall socket.
When the appliance is switched on for
the first time, the interior light may turn on
after a one-minute delay due to opening
tests.
To switch off the appliance, unplug it.
4.3 Temperature regulation
Recommended set temperature is:
• -18°C for the freezer.
The temperature range may vary between
-16°C and -24°C .
To set the temperature of the appliance,
press the temperature regulation button
repeatedly until you reach the desired
temperature of the compartment.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most
suitable one.
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
4.4 High temperature alarm
The alarm activates when you plug the
appliance for the first time.
The alarm activates when the temperature in
the appliance is too high.
During the alarm:
• the alarm indicator flashes,
• the temperature indicator -24 flashes,
• the acoustic alarm beeps.
Turning off the alarm
• Press a key on the control panel to turn off
the alarm. The alarm indicator is on until
the temperature is restored.
• Alarm beeping turns off automatically after
1 hour. Alarm indicator flashes and
temperature indicator -24 flashes.
• If the appliance is back to the set
temperature, the alarm beeping and alarm
indicator turn off. Check if the food inside
is not spoiled or thawed. If yes, refer to the
"Thawing" section.
Refer to the "Temperature regulation"
section to set the appliance temperature.
4.5 Super Freeze function
The Super Freeze function is used to perform
pre-freezing and fast freezing in sequence of
freezer compartment. It accelerates the
freezing of fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the Super
Freeze function at least 3 hours before
placing the food to complete pre-freezing.
To activate this function, press repeatedly the
temperature regulation button until the Super
Freeze indicator appears.
This function stops automatically after 24
hours.
You can deactivate the Super Freeze function
before its automatic end by repeating the
procedure until the Super Freeze indicator
turns off or by selecting a different
temperature of the freezer compartment.
4.6 Alarm
In case of cooling issues, power interruptions
or significant temperature changes inside
your appliance, the alarm indicator lights up
red and the sound is on.
ENGLISH
9
Publicidad
