Descargar Imprimir esta página

Lorex B861AJ Serie Manual De Instrucciones página 11

Publicidad

EN - FAQs
Why is the battery doorbell not turning on?
Is the battery doorbell dual-band or single-band?
This is a single-band 2.4GHz Wi-Fi battery doorbell.
What is the battery life of the doorbell?
Battery life is dependent on ambient temperature, motion settings, number
of events, etc. The battery life can last between 2-4 months. The following
are estimates of battery life based on daily events:
How do I activate the Deterrence Light and/or Smart Security LED when
motion is detected?
1.
2.
3.
How do I enable a Quick Response?
1.
2.
3.
How do I enable the Night Light Mode?
1.
2.
B861AJ_QSG_EN-FR-ES_R1.indd 11
B861AJ_QSG_EN-FR-ES_R1.indd 11
Make sure your doorbell is fully charged. See Battery Setup, page 5.
For detailed support material, scan the QR code on page 14.
25 events per day: approx. 2 months
12 events per day: approx. 3.5 months
6 events per day: approx. 7 months
Open the Lorex app and tap
Tap Light Settings, and then
Light on Detection. Tap Deterrence Light Mode to select a solid or
flashing light, and then Light Brightness to adjust the brightness
level.
Tap
to enable Activate Status LED on Detection, and then LED
Color to set a custom Smart Security LED color.
Open the Lorex app and tap
Tap Quick Responses, and then select one of the pre-recorded
messages to answer for you or tap + to create your own custom
response.
Tap Quick Response Cycles to set how many times the response
will repeat.
Open the Lorex app and tap
Tap Light Settings, and then
Edit Schedule to set custom times for the night light to turn on and
off.
above the camera's thumbnail.
to enable Activate Deterrence
above the camera's thumbnail.
above the camera's thumbnail.
to enable Night Light Mode. Tap
11
2023-09-22 6:23:52 PM
2023-09-22 6:23:52 PM

Publicidad

loading