Publicidad
Idiomas disponibles
Idiomas disponibles
t
RoUbLE
Be CERTAIN to shut off the plasma cutter, disconnect it from power and air, and allow it to
cool before adjusting, cleaning, or repairing the unit.
COMMON PROBLEMS
PROTECTION
INDICATOR LIGHT
COMES ON
REPLACEMENT PARTS
MODEL NO
DESCRIPTION
2-1570
PLASMA 20A ELECTRODE (2PK)
2-1571
PLASMA 20A AIR DIFFUSER RING (2PK)
2-1572
PLASMA 20A REPLACEMENT CUTTING TIP/ELECTRODE 2-1578
2-1573
PLASMA 20A REPLACEMENT CUTTING TIP
2-1574
PLASMA 20A REPLACEMENT CUTTING SHIELD CAP
2-1575
PLASMA 45A REPLACEMENT CUTTING SHIELD CAP
!
WARNING:
dry insulating gloves. Insulate yourself from work and ground.
Fumes and gases can injure you. Keep your head out of fumes. Use enough ventilation and/or exhaust at the arc to keep
fumes and gases from your breathing area.
Cutting sparks can cause fire or explosion. Keep flammable material away. Keep fire extinguisher nearby when cutting.
Arc rays can injure eyes and burn skin. Wear correct eye and body protection.
®
S
hootiNg
POSSIBLE CAUSES
1. No input compressed air
2. Discharge gap is too big
3. Machine over heated, exceeded duty cycle
4. Broken connection in the thermal relay
5. Main PCB board is damaged
Electric Shock Can Kill. Do not touch electrical live parts or electrodes with skin or wet clothing. Always wear
e
ect
l
K-T Industries, Inc.
Sheldon, IA 51201
www.ktindustries.net
PAGE | PAGE | PÁGINA
REMEDIES
1. Check air connection
2. Decrease gap between tip and workpiece
3. Wait for machine to cool down
4-5. Have a qualified technician inspect and repair/
replace as necessary
MODEL NO
DESCRIPTION
2-1576
PLASMA 45A ELECTRODE (2PK)
2-1577
PLASMA 45A AIR DIFFUSER RING (2PK)
PLASMA 45A REPLACEMENT CUTTING TIP/ELECTRODE
2-1579
PLASMA 45A REPLACEMENT CUTTING TIP
2-1580
PLASMA 45A REPLACEMENT DOUBLE POINTED SPACER
3112 NW Blvd.
8
®
®
®
®
Publicidad
