Descargar Imprimir esta página

cecotec CONGA 3000 CARPETCLEAN Manual De Instrucciones página 47

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
1. PARTS AND COMPONENTS
Fig. 1
1. Power button
2. Clean-water tank release tab
3. Clean-water tank
4. Main body
5. Hose
6. Hose hook
7. Water release button
8. Hose bracket
9. Plug
10. Waste-water tank
11. Waste-water tank release tab
12. Handle
13. Power cord holder
To transport the device, you can wind the hose around the machine and tie and hang the power
cord in its hook, as shown in Figure 1.
Attachments
Fig. 2
A. Water suction nozzle with brush, to be used on carpets, etc.
14. Suction inlet
15. Brush
16. Water outlet
B. Right-angle suction nozzle, for narrow slots and seat backrests
17. Suction inlet
18. Water outlet
2. BEFORE USE
-
This product includes a safety package to protect it during transport. Unpack the device
and keep the original packaging and materials in a safe place. It will help prevent any
damage if the product needs to be transported in the future. In case the original packaging
is disposed of, make sure all packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If any sign of
visible damage is observed, immediately contact Cecotec's official Technical Support
Service.
ENGLISH
CONGA 3000 CARPETCLEAN
47

Publicidad

loading