Pelonis PFT42A5ABBUK Manual De Usuario página 7

d. REMOTE CONTROLLER OPERATION
Point the remote controller at the receptor on body of the fan and press the desired
button. The remote controller will work at distances of up to roughly five meters and
the angle of 30 degree included between right and left from the receptor.
The batteries must be removed from the remote controller before it is scrapped and
that they are disposed of safely.
e. OVERHEAT PROTECTION OF THE MOTOR
The windings of the motor have a thermal-fuse that burns out and the fan switches
off and temperature of the motor is no longer going up so that plastic parts of the fan
don't subject to deformation so far so to be burned by the overheat if the motor is
overheat for any unexpected reason.
II. Buttons on fan body / Panel indication (Fig.3)
a. KEY INSTRUCTION
1. " " ON/OFF KEY
Press this key to switch on/switch off the fan.
2. " " SPEED KEY
When the fan started, press this key repeated, the fan will
work with "1-2-3-4-5-1" circulatory.
3. " " MODE KEY
When the machine is on, short press this button to select "normal wind",
"wind changes with temperature", "sleep wind", "natural wind".......
Circulating between the four wind classes
4. " " OSC/LOUVER KEY
After the fan has started, press this key to select oscillation mode. The lights on the
display can indicate fan oscillation mode.
5. " " TIMING KEY
Press this timer key repeatedly to set the time for air delivery. Increase in
increments up to "1-2-3-4-5-6-7-8-9" hours.
b.Description of function icon
1. " " The indicator light is on when the wind changes with temperature
2. " " Light on，start the sleep wind mode, and the fan will automatically adjust
the gear cycle according to the established procedure
3. " " The light is on in natural wind mode
6
Fig.3