Little Seeds 9775339COM Instrucciones De Montaje página 10

P
P
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
Press CAM BOLT into hole.
3
Press parts together so CAM BOLT inserts
into edge hole.
littleseedskids.com
Before You Start
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of part
Give yourself enough room for the assembly process
Have the following tools: #2 Philips Head Screwdriver, Hammer,
Level, Stud Finder, Pencil, Rubber Mallet and a Drill with 1/8" and 1/4" bits.
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight. Reduce
torque setting to a lower level so the drill will skip when the screw is
tight. Failure to do so may result in stripping the screw.
2
End hole
Press CAM LOCK into hole.
4
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
10
Arrow to point towards end
hole in edge of part.