Black and Decker BWDS Manual De Instrucciones página 10

SET UP & USE
Insert 3R (LOWER RIGHT BACK VERTICAL POLE) into the rear slot of 1R (RIGHT
BASE).
Align with the hole of 1B (BACK BASE) and the CORNER SUPPORT. Insert 45L
(45mm LONG SCREW) all the way through the hole of the (CORNER SUPPORT), 1B
(BACK BASE).and then 3R (LOWER RIGHT BACK VERTICAL POLE).
Add 35M (35mm MEDIUM SCREW) through the remaining hole of the (CORNER
SUPPORT) and insert into 3R (LOWER RIGHT BACK VERTICAL POLE).
NOTE: Follow the same steps to assemble the left side.
Page 10
3L
2L
45L
35M
1L
35M
1F
2R
1B
1R
35M
1B
1R
3R
45L
CORNER SUPPORT
35M
3R
45L
CORNER
SUPPORT
35M