MSA GasGard XL Instrucciones Para El Usuario página 16

4 Operation
4.5 Viewing Channel Information
1. Viewing the Basic Screen, press [ENTER].
2. Select the channel by pressing [DOWN].
3. Press [ENTER] to confirm.
The next screen (above) shows channel information as:
1 Channel number
2 Measured gas
3 Active Channel Symbol
NOTE: To change gas type, unit of measure or alarm levels, see the Quick Startup Guide (P/N 10095757) or 5
Configuration.
4.6 Viewing Events Archive
1. Viewing the Basic Screen, press [ENTER].
2. Select the Event Archive button by pressing [DOWN].
3. Press [ENTER] to confirm.
17
4 Measured gas value and unit or channel state
5 Preset alarm levels
GasGard XL US