Publicidad
Idiomas disponibles
Idiomas disponibles
2. TECHNICAL SPECIFICATIONS
Rated voltage:
Power consumption:
Plate finish:
Max temperature:
Protection class:
3. PRODUCT DESCRIPTION
1.
LED indicator light
2.
—
/O button
3.
Lock button
4. BEFORE FIRST USE
Unpack all parts and check for damage that may have occurred during transportation.
1.
If any parts are damaged or missing, contact our after-sales service team.
2.
Clean the device and its components (→ CLEANING AND CARE).
5. OPERATION
■
Only use the hair straightener on clean, healthy, dry, and untangled hair.
■
Rest the hair straightener on a smooth, sturdy, flat and heat-resistant surface. Alternatively,
use the hook (4) to hang the hair straightener up on a hook making sure there are no
flammable items nearby.
1.
Fully unwind the swivel power cord (5) and plug it into a suitable power outlet.
2.
To turn the hair straightener on and start heating the plates, slide the —/O button (2) to the
—
position. The LED indicator will turn on and the plates are being heated.
3.
Slide the lock button (3) to the unlock position
4.
Take a slim section of hair (max. 3-4 cm wide). Place the hair between the heating plates
at the roots. Then clamp the hair straightener firmly onto the hair, slowly pull the hair
straightener toward the ends of the hair to straighten in a steady movement that lasts a total
of more than 2 seconds.
TIP: To create a flick at the hair ends, slowly turn the hair straightener either inwards or
outwards before releasing the hair.
Once you have finished using the device, slide the —/O button (2) to the O position to turn it
5.
off.
6.
Press the handles together and slide the lock button (3) to the lock position
heating plates.
7.
Unplug the device from the electrical outlet after each use. Allow the device to cool down
completely before storing.
WARNING: Never leave the device unattended while it is plugged in. Unplug the device
from the power outlet after each use to avoid electrical hazards.
110-240 V~, 50-60 Hz
25-25W
Ceramic
180°C
Class II
4.
Hook
5.
Swivel power cord
6.
Heating plates
to open the device and start using it.
7
EN
to lock the
Publicidad
