Service & Maintenance - Joerns Oxford 4-Point Adaptive Power Cradle Manual Del Usuario

English
7. Service and Maintenance Schedule
1. Check for freedom of rotation (power cradle)
2. Check for wear on the central pivot point (the pivot pin located in the
cradle frame)
3. Check for firm attachment to the boom of the lift
4. Check for wear of the boom and quick release pin on the lift
5. Check the actuator for correct operation listen for unusual noise
6. Lubricate the pivot joints, including boom and cradle
7. Inspect pivot joints, including boom and cradle for excessive wear.
Replace as required
8. Check power cable is firmly attached to the charger
Cleaning
The Oxford 4-point Adaptive Power Cradle will when necessary require cleaning. It can be cleaned
with warm water or a disinfectant cleaning fluid.
CAUTION: Harsh chemicals may dull or remove the paint/finish from the cradle.
DO NOT spray or submerge the lift in any liquid.
WARNINg
Oxford
Adaptive Power Cradle
ü ü
ü
ü ü
ü
ü ü
ü
®
ü
ü
ü
ü
ü
ü
ü
11