Component Parts; Assembly Instructions (Connection And Removal) - Joerns Oxford 4-Point Adaptive Power Cradle Manual Del Usuario

Oxford
®
Adaptive Power Cradle
2. Component Parts: Adaptive Power Cradle
The following components are included with your 4-point Adaptive Power Cradle (see fig. 4).
1. 1 x 4-point Adaptive Power Cradle
2. 1 x Battery charger
3.
2 x Rechargeable batteries, NiMH
4. 2 x Black plastic caps for Stature and Presence boom
5. 1 x User/service manual (not shown)
3. Assembly Instructions
Assembly is quick and easy but it is important that you follow the procedure carefully.
FOLLOW THESE INSTRUCTIONS EXACTLY:
Removal:
To attach your 4-point Adaptive Power Cradle you must first remove the old spreader bar/cradle
from the lift. This is achieved by removing the quick-release pin that retains the non-powered
spreader bar/cradle (see fig. 5). A small flat blade screwdriver or similar is the only tool required.
4
Black Plastic Caps
4-point Adaptive Power Cradle
Battery Charger
(UK lead shown only)
2 x Rechargeable
Batteries
English
Fig. 4
Fig. 5