Descargar Imprimir esta página

GE JKP30 Manual Del Propietário página 21

Horno de pared, electrico empotrado
Ocultar thumbs Ver también para JKP30:

Publicidad

Idiomas disponibles

Idiomas disponibles

GEPpp/iance&com
GoO Gro
LstortJ
ooki_
imeJ
I
2
3
z_
5
or
®®
{depending on model)
1
2
3
4
5
OF
®
®
Tem_
tdependingon model)
When the display shows D the oven
is set in Sabbath, When the display
shows D C the oven is
baking/roasting,
How to Set Sabbath Feature for Timed BaMng/Roasting
- Immediate Start and
Automatic Stop
NOTE: Tounderstandhow the ovencontrol
works,practice using regular (non-Sabbath)
Immediate Start and Automatic Stop before
entering the Sabbathmode
Make sure the clockshows the correct time
of day
[_
Press and hold both tile Bake and
Broil Hi/to pads, at the same time,
unOl the display shows SE
NOTE: If bake or broil appears in
the display, the Bake and Bmi/Hi/to
pads were not pressed
atthe same
time. Press file Clear/Offpad
and
begin again.
[_
Tap tile Belay Start pad until SAb
bAtH appears
in tile display:
[_]
Press tile Start pad and D will appear
in the display:
[_
Press tile Cooking Time pad.
%
g2
%
On
models
with
number
pads,
press
them
to set tile desired
length
of
cooldng
time
between
1 minute
and
9 houls
and
99 minutes.
On
models
widl
Hourand
Min + or -
pads,
press
diem
to set the
desired
lengfll
of cooldng
0me
bet_,veen
1
mim_te
and
9 hams
and
59 mimlws.
Tile cooking
time that you entered
will be displayed°
Press tile Start pad.
Press the Bake pad. No signal will
be given.
On models with nmnber pads, press
them in order to set tile desired
temperatme.
%
On models
with
Temp +
and - pads,
tile preset starting
temperature
will
automatically
be set to 350 °. Tap the
Tamp+ or - pads to increase or
decrease
tile mmperamre
in 5 °
increments.
(The
Temp + or - pad
should
be tapped
for each
temperature
change;
pressing
and
holding
these pads will not allow
accmam
temperature
setting.)
Tile temperature
can be set
be_,veen 170 ° and 550 °.
No signal or temperature
will be
given.
Press tile Start pad.
After a random delay period of
approximately
30 seconds to 1
minum, D C will appear in the
displ W indica0ng that the oven is
baking/ro_Lsdng. If D C does not
appear in tile display, start again
at step 7.
To adjust tile oven temperature,
press tile
Bakepad and enmr the new mmperamre
using tile number pads (on some
models) or mp tile Tamp + or - pads (on
some models) to increase or decrease the
temperature
in 5° increments.
(The Tamp
÷ or - pad should be rapped for each
mmperamre
change; pressing and
holding these pads will not allow
accuram temperature
setting.)
Press the Startpad.
When cooking is finished, the display
will change fiom D C to D and 0:00will
appem; indicating that the oven has
mined 0FFbut is still set in Sabbath.
Remove the cooked fbod.
k_0ff_)
:
LstarL)
How to Exit the Sabbath Feature
[_
Press tile Clear/Off pad.
[_
If tile oven is cooldng,
wait
for a random
delay period
of
approximately
30 seconds
to 1
minute,
until only D is in tile display.
[_
Press and hold both tlle Bake and
Broil Hi/to pads, at the same
time,
until tile display shows SE
[_
Tap tile Oelay Start pad until 12shdn
or nOshdn appears
in tile display:
12
shdn
indicates
that tile oven will
automaOcally
mrn off _d*er 12 hems.
no
shdn
indicates
that tile oven will
not automa0cally
turn off.
[_]
Press tile Start pad.
NOTE: If a power outage
occurred
while
tile oven \,wksin Sabbath
mode,
tile oven
will automa0cally
turn off and tile oven
control
must be reset.
21

Publicidad

loading