Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTRUCTIONS FOR USE
3.1 Before first use
1.
Remove the packaging and check that all accessories are present. If any parts
are missing, contact our customer service department.
2.
Remove all tape on the product and remove the accessories from the product.
3.
Clean the inside of the product with diluted detergent, warm water and a soft
cloth.
4.
Then rinse the inside with clean water and drain the water out through the drain
cap on the front.
5.
Clean the outside of with mild detergent and warm water.
6.
Dry the inside and outside with a clean soft cloth.
Note
◊ Make sure the plug is always readily accessible.
◊ Always fill the product with drinking water only.
◊ Place the product on a flat work table, away from direct sunlight and other heat
sources (i.e.: stove, oven and radiator).
◊ Make sure there is at least 15 cm space between the back and sides of the
product and the wall.
◊ Let the product rest for at least 24 hours before plugging it in. This will ensure
that the refrigerant in the product has completely subsided.
3.2 How to use
1.
Ensure that the drain cap at the bottom is properly inserted into the product.
2.
Remove the ice basket.
3.
Pour cool potable water into the water reservoir
(maximum 1.1 liters at a time and ±10°C water
temperature). Make sure never to exceed the
MAX level.
4.
Replace the ice basket.
5.
Plug in the power cord. The indicator light turns
red.
6.
Briefly press 'Ice/Clean' to make ice.
Note
◊ The product needs some time for the water to cool back completely and make
solid ice nuggets.
◊ Pressing 'Ice/Clean' for 5 seconds will start the cleaning program.
English
31
Publicidad
