Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Installation
Television Location
This
unit is intended
to be
used
with
an
optional
stand
(TY-275F25M)
or
entertainment center. Consult your dealer for available options.
O
Avoid excessive sunlight or bright lights, including reflections.
O
Keep away from excessive heat or moisture.
Inadequate ventilation may cause
internal component failure.
O
Fluorescent fighting may reduce Remote Control transmitting range.
O
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components.
For best
results:
O
Use 75-ohm coaxial shielded cables.
O
Check type of output and input connectors on your components.
O
Determine required cable lengths.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT.
DO NOT
USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC
ADAPTOR CONNECTOR MAY BE NECESSARY.
Cable / Antenna
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming Cable from
Cable Company
Polarized plug
Connect the cable supplied by your local cable company.
Note:
<A cable converter box may be required for proper reception.
Check
with
your
focal
Cable
company
for
compatibility
@ CREED
5
on back of TY
Antenna
Connection
e
For proper reception of VHF/UHF
channels,
an external antenna
is
required. For best reception an outdoor antenna is recommended.
.
Antenna must be set to TV mode in the SET UP menu.
Incoming Cable from
Home Antenna
SN
Ay /= Cable Preset
Cable
Mode
is preset
at
the
factory.
AE
Antenna users must change to TV Mode in
the
Set
Up
Menu
under
Prog.
Chan
(Program Channels).
Publicidad
