Publicidad
Idiomas disponibles
Idiomas disponibles
10.1. Battery charging procedure.
•
Charge at temperature of ＋10°C~＋45°C indoor.
•
The three-way battery charger allows you to recharge the three batteries supplied at the same
time.
•
Make sure specifications on battery and adapter matched before charging.
•
The red LED light on the charger indicates the battery is charging, the green LED light indicates it is
fully charged. The approximate charging time is 3 to 4 hours (charging time for 2 fully discharged
batteries at the same time), do not keep the batteries connected longer than necessary as they
may damage them.
•
The charger has three outputs, you can charge up to 3 batteries simultaneously. The charging time
is proportional to the number of batteries connected and the state of their charge. Monitor the
charging time by the LED indicator (red light in charge, green light end of charge).
•
Disconnect the battery charger connectors from the batteries after charging is complete.
•
Make sure the battery is recharged at least every 4 months when not in use. Do not store the
machine with the battery connected.
11. Working environment
• Keep temperature of environment at 10°C ~ 45°C when charging battery, 0°C ~ +45°C when battery
is working.
• Keep tool at temperature of 0°C ~ +60°C when working
• Do not use in explosive atmosphere or near flammable substances or gases.
• Do not use in case of rain or on wet branches
12. Assembly
Check that the pruning shears and batteries are clean and dry, and then place the battery in the battery
compartment on the pruner.
33
Publicidad
