Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (see Fig)
1. Insert the pole
holder
into the pole
2. Push the ground spike
(lawn, flower bed, etc.).
3. You can fix the LED solar light chain
on the desired surface, twist on the tree
or railing by using the mounting material
such as cable tie (mounting material is
not included).
Note: Ensure the product is stable. Do
not use force when assembling or setting
up the prod uct e.g. hammer blows.
This will damage the solar panel
Note: For the best results, put the prod-
uct in a place where the solar panel
is exposed to di rect sunlight for as long
as possible. Do not put the product under
bushes, trees, canopies etc. as this reduces
the incidence of incoming sun light. Position
the product in such a way that the solar
into the ground spike
5
and insert the ground spike
3
.
5
into the ground
6
GB/IE
6
7
.
4
4
43
Publicidad
