Urbanista Palo Alto Manual De Usuario página 4

USER MANUAL
WELCOME TO URBANISTA
Thank you for choosing Urbanista Palo Alto. This guide will help you get the most
out of your new earphones.
POWER ON AND OFF
The earphones automatically power on when opening the charging case lid. To
turn off the earphones, put them back in the charging case and close the lid.
The earbuds will automatically power off after 5 minutes of disconnection or 30
minutes of inactivity.
FIRST PAIRING AND RECONNECTION
Open the charging case lid to initiate first-time pairing. The LED will first indicate
the charging case battery level, then start flashing to indicate pairing mode. Go to
the Bluetooth settings on your device and select "Urbanista Palo Alto" to connect.
The LED will stop flashing as the earphones successfully connect. The earphones
will automatically try to reconnect to the last connected device(s) every time
they are powered on.
BLUETOOTH MULTIPOINT CONNECTION
Palo Alto can be connected to two Bluetooth devices simultaneously through
Bluetooth multipoint. This allows you to seamlessly switch between 2 connected
devices, such as your phone and a computer, without disconnecting from one.
Pair and connect to a second device
Activate Bluetooth multipoint in 3 different ways, depending on your situation
and need:
• Long-press left and right earphones simultaneously for 2 seconds..
Or
• Keep both earphones in the charging case. With the lid open, press the
button on the bottom of the charging case for 2 seconds. The LED will
start flashing to indicate that Bluetooth multipoint is activated.
Or
• Activate Bluetooth multipoint in the Urbanista app.
• When activated, go to the Bluetooth settings on your second device and
select "Urbanista Palo Alto" to pair and connect.
• The earphones are now connected to both devices.
The earphones can pair with and store up to 8 devices and will connect to the
last two devices every time it's powered on. Bluetooth multipoint does not allow
audio from 2 devices to be played simultaneously. Pause the music on your first
device before switching to your second device. You can also manage Bluetooth
multipoint through the Urbanista app.
TOUCH CONTROLS
Use the double- and triple-tap commands to control music and calls. Left- and
right-side long-press can be customized through the Urbanista app.
• Play/Pause: Double-tap left or right side.
• Previous song: Triple-tap left side.
• Next song: Triple-tap right side.
• Answer/Hang-up: Double-tap left or right side.
• Reject a call: Long-press left or right side.
(EN)
4