Descargar Imprimir esta página

Helvex Vertika E-905 Guia De Instalacion página 2

Publicidad

Desenrosque la tuerca, retire la
2
rondana y el separador.
/
Remove the
stainless steel washer and shank
gasket.
separador
shank gasket
rondana
stainless
tuerca
steel washer
nut
Abra el suministro de agua y purgue la línea de alimentación.
5
To purge supply lines, open and close angle stops.
líneas de
alimentación
angle stops
agua caliente
hot water
Instalación Contra Desagüe
Desarme la contra desagüe.
7
/ Exploded drain.
protector
tapón elevador
cap lifter
contra superior
against superior
empaque
gasket
tubo céspol
tuerca
drain tailpiece
nut
Inserte la salida en el lavabo y
3
verifique que se coloque el empaque.
/ Place the output in the sink and
check that the gasket.
empaque
gasket
Limpie la superficie.
Clean the surface.
agua fría
cold water
/ Drain Installation
Inserte la rondana y el empaque. /
8
8
Insert the conical gasket and fiber
washer.
Nota: Si su mueble no tiene rebosadero, puede
adquirir el cuerpo sin rebosadero Mod. TH-1085.
Note: If your furniture does not have overflow, can
acquire the body without overflow Model TH-1085.
empaque
gasket
/
Conecte las mangueras (incluidas) a los tubos de alimentación y
6
posteriormente a la línea de alimentación.
(included) to the lateral bodies and subsequently the supply line.
½-14-NPSM
mangueras
(incluidas)
hoses
(included)
línea de
alimentación
angle stop
(not included)
empaque cónico
conical gasket
rondana de fibra para contra
fiber washer for counter
Coloque el separador, rondana y
4
enrosque la tuerca para sujetar la
salida./Place the shank gasket,
stainless steel washer and tighten the
nut to hold the output.
separador
shank gasket
rondana
stainless steel
tuerca
washer
nut
/ Connecting hoses
Coloque la contra con su empaque en
9
el lavabo. /
Place against their gasket
in the sink.
empaque
gasket
2

Publicidad

loading