Wiggo WO-B608 Manual De Usuario página 65

Removing The Wire Racks
⚠ The racks may be hot, do not touch the racks when they are hot. Wait for
them to cool down.
The cleaning process of the oven's side walls may vary depending on the
appliance model. This feature may not be available in your appliance.
Step 1 Firstly, lift the rack carefully from the
front hanger (1) in the direction of the
arrow and remove it (2).
Step 2 Afterwards, pull the whole rack out in
the direction of the arrow.
Attaching The Wire Racks
Step 3 Center the racks and firstly, place
the rear hanger (1) and press on it (2).
Step 4 Then, press on the front hanger.
Thereby, the rack would be attached.
65
1
2
1
2