Daikin BRC51D61 Manual De Instrucciones página 4

• Do not allow children to play with the remote controller to avoid causing
damage to the product.
• Never disassemble the remote controller.
Touching the interior parts may result in electric shocks or fi re.
Consult your Daikin dealer for internal inspections and adjustments.
• Do not touch the remote controller buttons with wet fi ngers.
Touching the buttons with wet fi ngers can cause an electric shock.
• Do not wash the remote controller.
Doing so may cause electric leakage and result in electric shocks or fi re.
• Never let the remote controller to get wet.
Water can cause damage to the remote controller, and may cause an electric shock
or fi re.
• Never press the button of the remote controller with a hard and pointed
object.
The remote controller may be damaged.
• Never pull or twist the electric wire of the remote controller.
It may cause the unit to malfunction.
• Do not wipe the remote controller with benzine, thinner, chemical dustcloth,
etc.
The remote controller may get discolored or the coating peeled off. If it is heavily
dirty, soak a cloth in water-diluted neutral detergent, squeeze it well and wipe the
remote controller clean. And wipe it with another dry cloth.
– Hardware setting should be performed by installers or technicians.
The wired remote controller has 3 jumpers option to control the board function.
OPTION
SET TEMP. RANGE
* TURBO_QUIET
ROOM TEMPERATURE
Items to be Strictly Observed
CAUTION
NOTE
HARDWARE SETTING
NOTE
Summary of hardware setting
With Jumper
Set Temperature : 20°C - 30°C
Deactivate Turbo & Quiet Feature
Deactivate Room Temperature
Display
Set Temperature : 16°C - 30°C
Activate Turbo & Quiet Feature
Activate Room Temperature
Display
2
Without Jumper