Installation and maintenance should be performed by qualifi ed persons who are familiar with
local code and regulation, and experienced with this type of appliance.
1.
Accessories
The following accessories are included together with this manual. If any part is missing, contact
your dealer immediately.
1.1 Remote controller
1.2 Screw (2 pieces)
1.3 Operational manual
1.4 Wire
Screw
(2pcs.)
2.
Step-by-step guide
2.1 Remove upper case.
Insert a screwdriver in the recess of lower case to remove the upper case (2 points).
Remote controller printed-circuit
board is installed on the upper
case. Be careful not to damage
the printed-circuit board with the
screwdriver.
Be careful not to let dust or
moisture touch the printed-circuit
board.
2.2 Location where the wiring will enter the remote controller.
INSTALLATION
NOTE
Remote Controller
Operation Manual
(1pc.)
Screwdriver
Insert and twist the screwdriver
'LIGHTLY' for removal.
Top center outlet
Cut here
Cut the plastic at the notched area and
remove any remaining burrs.
3
Wire
(1pc.)
(1pc.)
Upper case
Lower case