System Setup; Putting The System Together - Bose CINEMATE 1 SR Guia De Instalacion

Putting the system together

Note: The CineMate
spacious sound. For best sound quality, the speaker array should not be placed inside a
cabinet, or diagonally in a corner.
Note: To avoid wireless interference, keep other wireless equipment, such as wireless
computer network routers, cordless phones, microwave ovens, or other WIFI-enabled
audio/video devices away from the speaker array and Acoustimass
Step 1: Connect TV audio to the speaker array
What you need for this step:
Speaker array
A. Check the audio outputs on your TV and choose the type of connection you want to
make. A digital audio connection is recommended using an optical or coaxial digital
audio cable.
TV
®
1 SR system uses the reflective surfaces of your room to deliver wide,
Analog stereo audio – The most common type of audio connection
where the left and right channel are connected separately.
Optical digital audio (recommended) – A digital audio connection
that passes digital data in the form of pulsating light through a fiber
optic cable.
Coaxial digital audio (recommended) – A digital audio connection
that passes digital data through a 75-ohm coaxial cable.
One of these audio cables:
Optical Coaxial
digital digital
S S
YSTEM ETUP
® module.
Analog
stereo
English – 9