Descargar Imprimir esta página

Maytag NEPTUNE Guia Del Usuario página 7

Ocultar thumbs Ver también para NEPTUNE:

Publicidad

Idiomas disponibles

Idiomas disponibles

Step
Start/Pause
- close the door and press the start/pause
pad to
start the dryer. Pressing off cancels the cycle and stops the dryer.
After
pressing start/pause,
the display will show the estimated
time remaining in the cycle.
ed_matedtime
INDICATOR
LIGHTS ...........................................................................................................................................
The indicator
lights above the dryness levels will light when the
pad is selected.
The cool
down
indicator
light will illuminate
when the dryer
moves into the cool-down
portion
of the cycle.
If the wrinlde
prevent
option
has been selected, the wrinlde
prevent
light will illuminate to indicate that the load is dry and
the dryer has moved into the wrinkle
prevent portion
of the cycle
(see below).
wrink!eprevent
co idow
WRINKLE
PREVENT
OPTION
Wrinlde
Prevent
- provides approximately
95 minutes of intermit-
tent tumbling
in unheated air at the end of the cycle to reduce
wrinkling.
Options
SPEoAL
CYCLES ...................................................................................................................................................................
Wrinkle
Release
- will release wrinkles from items that are clean
and dry but slightly wrinkled,
such as from a crowded closet or
suitcase or from sitting in the dryer too long after the end of the
cycle. It provides
10 minutes of heated tumbling and 8 minutes of
cool down tumbling without
heat.
Air Fluff - provides 20 minutes of tumbling in unheated air. Used
for freshening items.
wrJr
Special Cycles
6

Publicidad

loading