Hotpoint 20 Manual Del Propietario E Instalación página 4

How to install features.
(Not all features are on all models.)
(!) TOP FREEZER SHELF
Make sure the shelf front locks into
position.
Top Freezer Shelf
(_) FREEZER DOOR SHELF FRONTS
Make sure that the shelf front locks
into position,
NOTE: On dispenser models, the
longer shelf fronts go in the top
two positions,
__"'T"'I, sDh2,; F ront
- .....iiF-...
She,f
To remove: I,ifl the shelf extender
straight Ul), then pull out.
To replace: Engage the shelf
extender in the molded supports
of the door and push
in. It will
lock in place.
(_) FILTER CARTRIDGE
Remove Bypass Plug Install Filter Cartridge
3
/
Lower Door Bin
(_) LOWER FIXED DOOR BINS
Make sure the bin fronts lock into position.
11
1/
@ DAIRY COVER
@ BOTTLE RETAINER
@ ADJUSTABLE
DOOR BINS
DOOR BIN SNUGGERS
To remove: I,ifl the
fl'ont of the bin up,
then pull out.
To replace or relocate:
Engage the 1)in in the
molded supports of
the door, and l)ush
in. Bin will lock in
place.
About the shelves and bins.
(Not all features are on aii models.)
Rearranging the Shelves
Refrigerator Shelves:
ToRemove
4
Freezer Pan:
ToReplace ToRemove
I
Remove the pan by pulling it
fin'ward, lifting up the fl'ont
and sliding it past the stop
location.
Freezer Shelves:
ToRemove