Hotpoint 20 Manual Del Propietario E Instalación página 6

About the controlson the refrigerator.
Yourcontrols will look like one of the following:
I
I
FREEZER
REFRIGERATOR
0 IS OFF
9 IS COLDEST
Startup Steps for Proper Temperature Control
STEP l--Set Fresh Food Control (m "5.
STEP 2--Set Freezer Control on "5."
STEP 3--W_MT 12HOURS tilt tempenm*re to stabilize.
STEP _-lfa change is needed, ingle tile control one number at a time and allo_ 12houl_
fi)r tempel',_ture to stabilize.
NOTE:Turning tile refrigerator to the 0 (off) setting qa tile controls does not shut off
electrical power to fl_e reti'igeratol:
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
r
Adjust Temperature
0 is Off / 5 is Normal / 9 is Coldest
@ @ ® @ ®
Hold 3 seconds
To Change Temperature Control Setting with Touch Pads:
• Freezer setting is on the left side oi tile displa}.
• Refi'igerator setting is on tile right side of tile displa}.
-- Press the
Warmeror Colderpad
ibr compartment and dil>cfi(m desired.
-- Present control setting number will illmninate.
-- Each time tile pad is touched, compartment setting changes one numbel:
A display of 1 is warmest and 9 is tile coktest setting.
ToTurn Cooling Off."
To stop cooling in tile refl'igerator andfl'eezer compartment_s, first repeatedl} pl>ss
tile Warmer p ad
fi)r file t}'eezer lind] its disp] W continuously
flashes
"1". Then, using
the
l_fi'igeraUlr control, repeatedly
pl_ss Warmer umil both
dispk(vs
flash "0". "0" ill bofl_
dispkgs turns off the cooling system. On some models, it m W be neces.sar_ to set only
one control to 0 to turn off cooling ill both compamuents.
NOTE:Turning
tile refl'igerator
to tile 0 (Off) setting
via tile controls does not shut off
electrical power to tim reti'igemtor.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.