Xblitz S10 DUO Instrucciones De Uso página 17

05. MAIN FEATURES OF THE CAMERA
1. Camera modes
The camera has 3 modes of operation. Recording mode: in this mode the
camera records video. Photo mode: in this mode the camera takes photos.
Playback mode: view footage recorded by the camera.
2. Loop recording
The camera divides the recordings according to the selected time. You can
select the length of the files, when the memory card fills up the oldest
recording will be overwritten.
3. Resolution
The camera can record in various resolutions. The higher the resolution the
better quality of the recordings, but the recording files also take up more
space on the memory card, it is recommended to use the highest resolution.
4. G-Sensor
Gravity sensor. When the sensor is activated on impact, the recording file is
protected from being overwritten. It is recommended that the lowest availa-
ble value is set, as at a higher value the camera may pick up bumps caused
by unevenness of the road, which can cause the memory card to fill up.
5. Audio recording
Along with video recording, the camera can also record audio.
6. Motion detection
The camera has a motion detection mode that automatically starts a short
audio/video recording when a moving object (e.g. a person approaching the
car) is detected. The recording will be protected from being overwritten. To
avoid unnecessary clogging of the memory card in the device, only activate
the motion detection mode when you leave the car parked.
7. Rear view camera.
A rear camera is included to record video from the rear of the vehicle in
Full HD resolution. The DVR can record images from both the front and rear
cameras simultaneously without any loss in quality or resolution. In addition,
when connected to the power cables of the reversing lights, the image from
the rear camera will automatically appear on the display when you shift into
reverse, making it easier to park the vehicle.
06. DESCRIPTION OF THE MENU OPTIONS
VIDEO MODE:
1. Resolution - allows you to change the resolution of the recorded video files.
2. Loop recording - allows you to change the length of the recorded videos.
3. WDR - allows you to enable or disable the WDR (Wide Dynamic Range)
option, responsible for adapting the recording to the prevailing lighting
conditions.
17