Jimmy JV83 pro Manual De Instrucciones página 7

floor head and metal tube.
Assemble the floor head with metal tube assembly and handheld vacuum cleaner: as shown in
the picture, align the conductive needle of the metal tube with the coupler of the suction nozzle,
push up until a "click" sound is heard.(Fig 3)
Charging holder assembly
Assemble accessory holders to the charging holer, then fasten accessory holders with screw.
Put the vacuum cleaner in the holder, and lean the vacuum cleaner against the wall, place
the holder in the position that vacuum cleaner floor head does not touch ground. Take off
the handheld vacuum cleaner, place expansion pipe on the wall and place the holder to the
expansion pipe position, then lock in the screw. After assembly completed, put the vacuum to
charger holder to charge or store.
Attention: Do not fix the holder to bathroom or other humid wall.
Charging holder
Accessory
holder
Assembly of accessories
For the convenience of use, this product is specially equipped with some accessories for the
hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner alone,
you can directly connect the accessories according to your needs or connect the accessories
through the stretch hose.
Model
Name
Electric Mattress Head
Upholstery
tool
Crevice
tool
Stretch hose
Expansion pipe
46.5cm
Proposed distance
between holder
and floor: 115cm
Screw
JV83 Pro
5