Publicidad
Idiomas disponibles
Idiomas disponibles
Use of Vacuum
Charging
Attention: When use the product for first time, battery power is not full. Need to charge the
vacuum before using.
Charging of vacuum cleaner
When the vacuum cleaner power is insufficient, charge the vacuum cleaner in time ; When the
voltage is too low, to protect the battery, vacuum cleaner will be automatic power-off, at this
time the vacuum cleaner need to be charged. When charging, plug the charger connector into
the A/C power socket, plug another end of
charger into battery to start charging. When the
handheld vacuum cleaner LED display shows
an increase in power, it indicates that the
vacuum cleaner is charging. When charging is
completed, LED display show 100% power.
(Fig 4)
If battery pack is charged separately without
being assembled on machine, during charging,
indicator in battery pack is red and turns green
after charging is completed.
Attention:
1.When battery power is below ≤20%, if product
is working in Max mode , it will change to Turbo
mode automatically. When battery power runs
off, product will turn off automatically.
2.If vacuum cleaner is long idled, charge the
battery every three months to avoid battery
failure.
After charging, please pull the charger plug off
power socket and stop charging.
Attention: if power cord is damaged, to avoid
danger, it must be replaced by professional staff
of the manufacturer, repairing agent or similar
department.
Use of handheld vacuum and LED
screen contents
Take the vacuum cleaner off the storage
holder, press the on/off button to start or stop
the vacuum cleaner. Mode button can adjust
working mode. When machine is turned on, it
works in Auto mode, press the mode button
to switch to the sequence of Turbo- Max - Eco
mode. During mode switch the mode will be
displayed in LED screen.(Fig 5)
4
5
On/off button
6
min
Eco
min
Turbo
Mode button
min
Auto
min
Max
7
Publicidad
