14.
To insert/replace batteries: undo the screw on the battery compartment cover and open the compartment.
Fit batteries into space provided ensuring they observe the correct polarity (as shown on the product).
Close the compartment securely tightening the screw. Secure the toy tray on the walker.
The toy of the walker frame requires 2x AA 1.5V alkaline batteries (not included) to be inserted into the battery
compartment at the correct polarity.
•
Non rechargeable batteries are not to be recharged.
•
Rechargeable batteries (if they are removable) are to be removed from the toy in order to be recharged.
•
Rechargeable batteries are to be recharged only under adult supervision.
•
Do not mix different types of batteries, or new and used batteries.
•
Batteries are to be inserted with correct polarity.
•
Exhausted batteries have to be removed from the toy.
•
The supply terminals are not to be short circuited.
•
Do not try to open the batteries.
•
Do not throw the batteries in the fire as they could explode or leak some liquid.
•
Batteries should be changed by adults only.
•
Remove batteries before storing the toy for long periods.
•
Dispose of flat batteries in the designated recycling bins.
The strikethrough bin symbol on the appliance or on its packaging indicates that the product
must be disposed of separately from other waste at the end of its life for it to be properly treated
and recycled. The user must therefore confer the equipment at the end of its life to suitable
separate waste collection centres for electronic and electronic waste, or return it to the retailer
according to the following methods:
•
for small equipment, with at least one external side not exceeding 25 cm, there is free delivery without
obligation to purchase at stores with a sales area of electrical and electronic equipment of over
400 square metres. For smaller stores, this mode is optional.
•
for appliances which are larger than 25 cm, delivery is provided at all points of sale on 1on1 basis, which
is to say that the delivery to the dealer will only take place when buying a new equivalent product, on a
one to one basis. Adequate separate collection for the future recycling, treatment and environmentally
compatible disposal of disused equipment, helps preventing possible negative impacts on the
environment and on health, and promotes recycling and/or reuse of the materials of which they are
composed. Improper disposal of the product by the user entails the application of the penalties referred
to in current legislation.
•
Check regularly the walker frame for signs of damage or wear.
•
Clean the plastic parts, including the stoppers, with a damp cloth.
•
Clean the seat with brush or family soap and neutral scour.
•
Dry the metal parts to prevent the formation of rust.
•
Prolonged exposure to direct sunlight may cause the fabric to fade.
GR313_(exGR300)-SWEET CANDY_GirelloNuovo_v3P294_MOD_v6.indd 20
GR313_(exGR300)-SWEET CANDY_GirelloNuovo_v3P294_MOD_v6.indd 20
HOW TO REMOVE & INSERT REPLACEABLE BATTERIES
FITTING AND / OR REPLACING BATTERIES
WARNING
PRODUCT CARE AND MAINTENANCE
20
23/11/22 10:14
23/11/22 10:14