Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting Door Height and Door Gap
The height of a door can be adjusted using the
provided Snap Rings.
Tools you will need:
Snap Ring (4pcs)
To adjust the Height of Door
1. Check the height difference between the
doors and then lift and hold the lowest door
to be even with the other.
2. Insert a suitably sized Snap Ring between the
Door and the Hinge as shown.
IMPORTANT !
1. Insert only one Snap Ring. If you insert two
or more Snap Rings, they may slip out or
cause a rubbing noise.
2. Do not raise the door too much. The
door may contact and damage the
top cover.
3. Save rermaining Snap Rings for possible
future use.
Wrench(Not provided)
WARNING!
Contains Small Parts, Keep the Snap
Rings Away From Babies and Children.
5
Publicidad
