Assembling The Breast Pump - Philips AVENT SCF334 Manual De Instrucciones

English
14

Assembling the breast pump

4213_354_3951_4_DFU-Luxury_schalen naar 140x200_v7.indd 14
Note: Make sure you have cleaned and optionally disinfected the
appropriate parts of the breast pump.
1 Wash your hands thoroughly before you handle the cleaned parts.
Warning: Be careful, the cleaned parts may still be hot. Only start
assembling the breast pump when cleaned parts have cooled down.
Note: You may find it easier to assemble the breast pump while it is wet.
2 Insert the white valve into the pump body from underneath. Push the
valve in as far as possible.
3 Screw the pump body clockwise onto the bottle until it is securely fixed.
4 Insert the silicone diaphragm into the pump body from above.
Make sure it fits securely around the rim by pressing down with your
fingers to ensure a perfect seal.
5 Insert the cushion into the funnel-shaped section of the
pump body.
26/07/2018 15:20