Philips AVENT SCF334 Manual De Instrucciones página 25

4213_354_3951_4_DFU-Luxury_schalen naar 140x200_v7.indd 25
4 Insert the silicone diaphragm into the pump body from above. Make
sure it fits securely around the rim by pressing down with your fingers to
ensure a perfect seal.
5 Attach the handle onto the diaphragm with stem by hooking the hole
in the handle over the end of the stem. Push down the handle onto the
pump body until it clicks into place.
6 Insert the cushion into the funnel-shaped section of the pump body.
7 Push in the inner part of the cushion as far as possible and make sure
that it is perfectly sealed all around the rim of the pump body.
8 Press in between the petals to remove any trapped air.
Note: Place the cover over the cushion to keep the breast pump clean
while you prepare for expressing.
English
25
26/07/2018 15:20