Technical Information; Emc Information - Philips AVENT SCF334 Manual De Instrucciones

Technical information

EMC information

Emissions test Compliance
RF emissions CISPR Group 1
11
RF emissions CISPR Class B
11
Harmonic emissions Class A
IEC 61000-3-2
Voltage Complies
fluctuations/ flicker
emissions IEC
61000-3-3
4213_354_3951_4_DFU-Luxury_schalen naar 140x200_v7.indd 37
The Philips Avent breast pump needs special precautions regarding EMC
and needs to be installed and put into service according to the EMC
information provided in this section.
Portable and mobile RF communications equipment can affect the Philips
Avent breast pump.
The electronic breast pump has no essential performance. Due to EMC
influences, like wireless home network devices, mobile phones or cordless
telephones, the breast pump can turn off or go into error mode. This will
not lead to unacceptable risks. To prevent interference, keep other electric
equipment at least 3.3 feet/1.0 m away from the breast pump during
expressing and do not stack with other electrical equipment. Cable length
of the adapter: 2.50 meter/ 8.2 feet. The electronic breast pump has an
expected service life of 400 hours.
Electromagnetic Compatibility (EMC, IEC 60601-1-2)
Declaration – electromagnetic emissions
The Philips Avent breast pump is intended for use in the electromagnetic
environment specified below. The user of the Philips Avent breast pump
should assure that it is used in such an environment.
Electromagnetic environment – guidance
The Philips Avent breast pump uses RF energy only for its
internal function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby electronic
equipment.
The Philips Avent breast pump is suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low voltage power supply
network that supplies buildings used for domestic purposes.
English
37
26/07/2018 15:20