Publicidad
Idiomas disponibles
Idiomas disponibles
3.1 Display and Control Panel
Temperature set
Alarm symbol Temperature indicator
button
Super cooling symbol
3.2 Operating your Fridge Freezer
Lighting (If available)
When the product is plugged in for the
first time, the interior lights may turn on 1
minute late due to opening tests.
3.2.1 Temperature Set Button
This button allows setting temperature of
the fridge. In order to set values for fridge
partition, press this button. Use this button
also to activate super mode.
3.2.2 Temperature Settings
• It ensures that the temperature settings
in the cooling and freezing compartments
of your refrigerator are performed
automatically. It may be set to any
value ranging from MIN /8 to MAX /2
and super cooling mode. As you press
temperature set button from MIN to MAX
the temperature decreases. To save
energy in winter months, operate your
refrigerator in a lower position.
• Initial temperature setting for refrigerator
is at the middle point.
• Every time you press temperature set
button, setting temperature will decrease
until super cooling symbol and if you
keep on pressing the set temperature will
be min set temperature again.
If refrigerator has got freezer
compartment
3.2.3 Super Freeze Mode
When would it be used?
• To freeze huge quantities of food.
• To freeze fast food.
• To freeze food quickly.
Temperature
set button
or
Super cooling symbol
• To store seasonal food for a long time.
If refrigerator is cooler
3.2.4 Super Cooling Mode
When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
How To Use?
• Press temperature set button until super
freezing light comes on.
• Super led will light during this mode.
During this mode:
The super mode will be cancel
automatically max 48 hours.
3.2.5 Alarm light
In case of a problem within the fridge, the
alarm led will release red light.
3.2.6 Stand-By Mode
How To Activate ?
Set "MIN" set value and push set button
until
all leds are blink three times.
How It Works?
In stand-by mode; all components will be
disabled. If user push set button while in
stand-by mode, all leds will blink three
times to show stand-by mode is active.
How To Deactivate ?
Push and hold set button until display
returns to normal working.After the mode
is deactivated, the "Alarm LED" may light
on the display because the product may be
EN - 10
Temperature indicator
Alarm symbol
Publicidad
