Nexx X-COM 3 Pro Guia Del Usuario página 52

13.2.9 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls.
This feature increases the quality so that the audio will be crisp and clear
during phone call conversations. If this feature is enabled, incoming phone
calls will interrupt intercom conversations. Three-Way Conference Phone
Call with Intercom Participant will not be available if HD Voice is enabled.
Note:
• Refer to the manufacturer of your Bluetooth device that will be
connected to the headset to see if it supports HD Voice.
• HD Voice is active only when Bluetooth Intercom Audio Multitasking
is disabled.
13.2.10 Bluetooth Intercom Audio Multitasking (Default: Disable)
Audio Multitasking (Bluetooth Intercom Audio Multitasking and Mesh
Intercom Audio Multitasking) allows you to have an intercom conversation
while simultaneously listening to music, FM radio, or GPS instructions. The
overlaid audio is played in the background with reduced volume whenever
there is an intercom conversation and will return to normal volume once the
conversation is finished.
The Mesh Intercom Audio Multitasking feature is always on.
Note:
• For Bluetooth Intercom Audio Multitasking to work properly, you
need to power the headset off and on. Please restart the headset.
• Bluetooth Intercom Audio Multitasking will be activated during two-
way intercom conversations with a headset that also supports this
feature.
• Some GPS devices may not support this feature.
• The Audio Multitasking feature can be configured through the
Intercom-Audio Overlay Sensitivity and the Audio Overlay Volume
Management settings.
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
52