Nexx X-COM 3 Pro Guia Del Usuario página 55

14
TROUBLESHOOTING
14.1 FACTORY RESET
To erase all of your settings and start fresh, the headset can be restored to
factory default settings using the Factory Reset feature.
1.
2.
3.
14.2 FAULT RESET
When the headset is not working properly, you can easily reset the unit:
1. Open the Battery Module cover.
2. Locate the Pinhole Fault Reset Button at the back of the Battery
Module.
3. Gently insert a paperclip into the hole and press the Pinhole Fault Reset
Button with light pressure.
2
4. The headset will shut down.
Note: Fault Reset will not restore the headset to factory default settings.
X.COM3 - MOTORCYCLE BLUETOOTH COMMUNICATION SYSTEM WITH MESH INTERCOM
HOLD
10s
TAP
2x
TAP
1x
1
" Configuration menu"
" Factory reset"
" Headset reset,
good-bye"
55